Brush as often as your dentist or hygienist tells you to with an ADA Accepted anti-gingivitis toothpaste like Colgate Total. Only Colgate Total has been approved by the Food and Drug Administration and Accepted by the American Dental Association for the prevention and treatment of gingivitis, plaque and caries (cavities).

Brush gently with a soft-bristled toothbrush–avoid hard back-and-forth scrubbing that can irritate your gums.

Clean between teeth with floss or an interdental cleaner the way your dentist or hygienist tells you to do. Remember to rinse your mouth afterwards to remove plaque and food particles.

Do not smoke or use tobacco and, if you wear dentures, remove and clean them each day.

Remember to tell your oral health care provider of any changes in your condition and any medicines you might be taking.

The signs of gum disease are not always easy to see and can be painless. That’s why it’s so important to see a dental professional regularly–they’re trained to spot the early signs of gum disease.

Sophisticated restoration design meets superb functionality with Sirona’s patented Biogeneric software technology. Using the patient’s natural tooth structure as a basis, the software automatically creates perfect anatomical form for any single partial-coverage tooth restoration. Full-coverage restorations automatically adjust into the proper occlusal alignment based on the digital impression of a bite registration. The proven CEREC software techniques and functions are the result of continuous research & development, providing the streamlined and intuitive workflow you need for powerful possibilities.

 Your role? Just verify the proposed contacts.

 Effortless. Predictable, esthetically-pleasing results for you and your patients.

 3D Software that’s undeniably:

• Easy to use: Initial restoration proposals require minimal editing with software tools.
• Intuitive: On-screen instructions guide you effortlessly.
• Reliable: Software does the work for you as restorations adjust into occlusion automatically.
• Confident: Color codes ensure proximal contacts meet your specifications before you mill.
• Proven: Backed by over 23 years, 22,000 users, and 300 clinical studies.

 Source: http://www.cereconline.com/cerec/software.html

Comments: Outstanding introductory course in the use of the Cerec 3 system and how to apply its use in my practice.

Dr. Stines was able to impart her expertise and knowledge and fully understand her explanations. No stone was left unturned.

The small size of our class allowed for personal attention in the partial crown preparation exercises. Great feedback during our progress.

Dr. Stines will make herself available for future training.

Thank you very much
Dr. Nicholas Russo
 

Dr. Stines presented a very complete course on how to use and fabricate all ceramic restorations with Cerec 3 system. Two days were adequate time to cover the material and answer all the questions presented. I am very pleased with the course and looking forward to learning more about Cerec 3.

CDR Jorge Graziani
Camp Den Dept. Head

The training was outstanding. All aspects of inlay, full coverage, impressions, contrasting occlusion and software utilization were covered in depth. Actual preparations of model teeth were very helpful. I feel confident to begin using the equipment immediately and progressing on to higher levels of usage. Dr. Stines was Most professional, patient, and extremely knowledgeable. Outstanding experience.

Capt. Paul David
Head, Department of Prosthodontics
Navel Branch Dental Clinic Norfolk

Complicated subject presented in a hands on, one-on-one setting. Conducted in easy to understand environment.

Dr. Stines’ acumen of knowledge is impressive. Presentations are well put together with regard to power point and “lecture”. Written binder is a loose follow, and did not reference much.

We seek further training as staff rotates.

Cerec Training for Naval Branch Dental Clinic Norfolk

Dr. Stines was professional, through and extremely helpful. She exhibits strong clinical and knowledge and imports her knowledge to the class.

I have taken 3 Cerec classes and this was the most useful one.

Preparing teeth on typodonts is extremely useful and provides a better more interactive experience.

It would be good to add a 3rd day of clinical application on patients, as in other classes I have taken

Dr. Stines simplifies her training to give the students exactly what they need without giving them too much theoretical information.

* Harvard Health Letter, March 2000; NIDR of NIH, Dental Amalgam Study, 1993.
 

Exam and PreparationFirst, your Dentist examines the tooth and determines the appropriate treatment. It could be a simple filling, or a full crown, depending on how much healthy tooth structure is remaining and the clinical judgment of your Dentist. Next, he or she administers an anesthetic and prepares your tooth for the restoration, removing decayed and weakened tooth tissue. This preparation is just like he or she would do for many other restorative techniques.

Optical ImpressionThen, your Dentist takes an Optical Impression of the prepared tooth. Instead of filling a tray with impression “goop” that you must bite into and hold in your mouth until it hardens, your Dentist coats the tooth with a non-toxic, tasteless powder. A camera is then used to take a digital picture of your tooth. This whole Optical Impression process only takes a minute or two.

No TemporariesNext, the CEREC machine helps the Dentist create the restoration for your tooth. The CEREC 3D software takes the digital picture and converts it into a 3-dimensional virtual model on the computer screen. Your Dentist then uses his or her dental expertise to design the restoration using the CEREC 3D computer program. Within a few minutes, your Dentist clicks a button, and the restoration design data is sent to a separate milling machine in the office. A ceramic block that matches your tooth shade is placed in the milling machine. About 10 – 20 minutes later, your all-ceramic, tooth-colored restoration is finished and ready to bond in place. Finally, your Dentist tries the restoration in your mouth to ensure proper fit and bite. The restoration is then polished and bonded to the prepared tooth. Your tooth is restored with no “temporary” or return trip necessary. All of this is done in a single appointment! Ask your Dentist about CEREC today.

• Chairside: The technology is in the dental operatory and used while you are in the chair
• Economical: The procedure is economical for both dentist and patient
• Restorations: The procedure restores your tooth to its natural beauty, function, and strength
• Esthetic: The restorations are metal-free and tooth-colored
• Ceramic: High-strength ceramics are used that are close in composition to your natural tooth structure.

For an advanced dental restorative system that allows your dentist to restore decayed teeth, place crowns, remove defective amalgam fillings, or place cosmetic veneers in just one appointment. This allows you to have the highest quality, most lifelike dental restorations in just one visit to the dentist…in, out, and on with your busy life. The state of the art CEREC system was developed in 1985 at the University of Zurich in Switzerland by a dentist, Dr. Werner H. Moermann, and an electrical engineer, Dr. Markus Brandistini. Today, CEREC 3 with CEREC 3D software is still the world’s only chair side dental CAD/CAM restorative system. At the heart of the system is the innovative technology.

CEREC Acquisition Unit
The CEREC Acquisition Unit is mobile and houses a medical grade computer and the CEREC camera. Your dentist uses the camera to take a digital picture of your prepared tooth. This picture is used instead of a traditional impression. This means no impression tray and material for you to gag on. The computer and CEREC 3D software converts the digital picture to a three dimensional virtual model of your prepped tooth. Your dentist then designs your restoration right on screen using the software while you wait (and watch!). This software can assist your dentist with designing any single tooth restoration: crowns, inlays (fillings), onlays (partial crowns), and veneers. Once your dentist has designed your restoration (usually about 5 minutes), he or she clicks a button, and the design data is communicated via a wireless radio signal to the CEREC Milling Unit.

CEREC Milling Unit
Your dentist or dental assistant selects a ceramic block that matches the shade of the tooth being repaired. He or she then inserts the block into the Milling Unit. The data from the Acquisition Unit is used to direct two diamond coated burs to carve the block into the indicated shape of the restoration. This process usually takes 8 to 18 minutes depending on the size and type of restoration. After the milling is finished, your dentist polishes the finished filling or crown and bonds it into place.
With CEREC technology, your dentist can restore damaged teeth or enhance your smile with bio-compatible, tooth-colored materials in a single appointment. This technology has a track record of almost 20 years, and more than 100 studies confirm the clinical excellence of the method. Ask your dentist about CEREC today.

Why patients are choosing CEREC
CEREC by Sirona Dental Systems is the world’s only system for the fabrication of all ceramic dental restorations in one office visit. With CEREC at your dentist’s side, you can be in and out in a single visit with a permanent, all ceramic crown, onlay, or veneer! For you, the patient, this means fewer injections, less drilling, and less time out of your hectic schedule for dental care. So, why are thousands of people world wide choosing the CEREC restorative technique for their dental needs?

Single Appointment Dental Care
Most dental restorative methods require more than one visit to the dentist. This means that on the first visit, you get an injection of anesthesia, your tooth prepared, an impression taken, and a temporary restoration put on your tooth. You make a second appointment for a couple of weeks later, get another injection, have the temporary pried off (if it hasn’t fallen off already), and have a permanent restoration put on. Why go to the dentist a second time when you don’t have to? With CEREC, the procedure is done in a single appointment, start to finish.

Finest Dental Materials
A CEREC tooth restoration isn’t just convenient, it is also healthy. Many years ago, dentists had few options to repair decayed and damaged teeth other than amalgam, gold, and other metals. With CEREC, your dentist can use strong, tooth colored ceramic materials to restore your teeth to their natural strength, beauty, and function. These materials closely match the composition of natural tooth structure. This means when you eat hot food and then drink something cold, the restoration and tooth expand and contract at almost equal rates. So, your tooth does not crack, and you can go on enjoying your evening. Also, the materials are chemically bonded to your tooth, so your dentist can save as much healthy tooth tissue as possible while providing you with a dental restoration that strengthens your tooth.

Smile Enhancement
Your dentist can use CEREC for more than just crowns and fillings. CEREC is capable of producing any single tooth restoration. Chipped or discolored front teeth can be repaired with beautiful CEREC porcelain anterior crowns or veneers. Your smile makes a lasting first impression. Enhance it with CEREC.
Worldwide, a CEREC restoration is placed every 20 seconds. With a history of nearly 20 years, this equipment has helped dentists place over 6 million restorations. Using metal free materials that are the closest to your natural enamel, CEREC gives you the highest quality restorative care. Ask your dentist today about single visit CEREC restorative care!

CEREC 3D TECHNOLOGY – SINGLE VISIT CROWNS

With Cerec 3D technology you can have a crown completed in one visit. Yes, you can have a crown completed in one visit. Computerized technology allow the crown to be completed right in our office. That means no messy impressions, no uncomfortable temporary crowns, no waiting for your final crown to come back from the lab. You save valuable time, because your treatment is completed in one visit.

How do we do this? Your tooth is properly prepared for the CEREC restoration, an OPTICAL IMPRESSION is taken by capturing a computerized image of your tooth. The restoration is then designed with the assistance of the computer (CAD CAM technology). The milling portion of the computer then makes your crown out of a porcelain block. This takes about 10 minutes. The completed restoration is then permanently cemented with the most advanced bonding techniques.

Cerec 3D technology
* ONE VISIT AESTHETIC
* DURABLE ALL PORCELAIN
* NO METAL MORE
* COMFORTABLE